Browsing SINTEF Industri by Title
Now showing items 699-718 of 1484
-
Improved CO2 flux by dissolution of oxide ions into the molten carbonate phase of dual-phase CO2 separation membranes
(Peer reviewed; Journal article, 2019)In a solid-liquid dual-phase CO2 separation membrane, the native ions in the molten alkali carbonate, including carbonate anions and metal cations can transport CO2 in a process that is charge-compensated by electronic ... -
Improved cyclability of Nickel-rich layered oxides
(Peer reviewed; Journal article, 2020)This study compares the physico- and electro- chemical properties of LiNi0.8Mn0.10Co0.1O2 (NMC811) and LiNi0.83Mn0.06Co0.09Al0.1O2 (NMCA) prepared by an oxalic acid co-precipitation. Deposition of a SiO2 surface coating ... -
Improved electrochemical performance and solid electrolyte interphase properties of electrolytes based on lithium bis(fluorosulfonyl)imide for high content silicon anodes
(Peer reviewed; Journal article, 2022)Electrodes containing 60 wt% micron-sized silicon were investigated with electrolytes containing carbonate solvents and either LiPF6 or lithium bis(fluorosulfonyl)imide (LiFSI) salt. The electrodes showed improved performance, ... -
An improved modelling framework for strength and work hardening of precipitate strengthened Al–Mg–Si alloys
(Peer reviewed; Journal article, 2022)A modelling framework for the strength and work hardening contributions in age hardened Al–Mg–Si alloys is presented. The modelling work is based on transmission electron microscopy (TEM) measurements of the needle-shaped ... -
Improved multi-stage cross-flow fluidized bed classifier
(Peer reviewed; Journal article, 2019)In the present work, improvements to a novel fluidized bed solids classification system previously published by Jayarathna et al. are discussed (Jayarathna et al., 2018 [1]). The system is designed for a high temperature ... -
Improved multidetector asymmetrical-flow field-flow fractionation method for particle sizing and concentration measurements of lipid-based nanocarriers for RNA delivery
(Peer reviewed; Journal article, 2021)Lipid-based nanoparticles for RNA delivery (LNP-RNA) are revolutionizing the nanomedicine field, with one approved gene therapy formulation and two approved vaccines against COVID-19, as well as multiple ongoing clinical ... -
Improving ageing kinetics and precipitation hardening in an Al-Mg-Si alloy by minor Cd addition
(Peer reviewed; Journal article, 2018)This study reports significant improvements in both the age hardening kinetics and peak hardness of an Al-Mg-Si alloy by microalloying with 0.06 at% Cd. A detailed high-angle annular dark-field scanning transmission electron ... -
Impurity Elements in Raw Gas Ultra-Fines from Aluminium Electrolysis Cells
(Peer reviewed; Journal article, 2012)The effect of alumina feeding and pot suction rate on the amount and composition of fine particles in raw gases has been investigated. Particle size distribution of ultra-fines (Di < 10 μm) were measured in real time and ... -
Impurity removal from Si by Si-Ca-Mg ternary alloying-leaching system
(Peer reviewed; Journal article, 2020)In this work, Si-Ca-Mg alloys were made with different compositions and solidification conditions to investigate the impurity segregation and separation performance from Si, especially for the crucial P impurity at several ... -
In situ heating TEM observations of evolving nanoscale Al‐Mg‐Si‐Cu precipitates
(Peer reviewed; Journal article, 2019)This research concerns the precipitation and subsequent dissolution of precipitate phases in an Al–0.86Mg–0.62Si–0.1Cu (at.%) alloy subjected to varying thermal exposure during an in situ heating transmission electron ... -
In situ investigation of spinodal decomposition in hypermonotectic Al–Bi and Al–Bi–Zn alloys
(Journal article, 2008) -
In situ monitoring of pit gas composition during baking of anodes for aluminum electrolysis
(Journal article; Peer reviewed, 2019) -
In situ observation of the carbothermic reduction and foaming of slags in silicomanganese production
(Peer reviewed; Journal article, 2021)The carbothermic reduction of slag in silicomanganese production is accompanied by the release of carbon monoxide. This gas can accumulate as bubbles within the slag, leading to foaming and, potentially, disturbances to ... -
In vitro evaluation of utilisable crude protein and methane production for a diet in which grass silage was replaced by different levels and fractions of extracted seaweed proteins
(Peer reviewed; Journal article, 2019)Utilisable crude protein (uCP), methane (CH4) production and other fermentation parameters were analysed in vitro for a diet in which grass silage was replaced by different levels of seaweed protein fractions prepared from ... -
In-situ electron loss spectroscopy reveals surface dehydrogenation of hydrated ceria nanoparticles at elevated temperatures
(Peer reviewed; Journal article, 2022)Ceria (CeO2) exhibits high reversible oxygen storage capacity at intermediate temperatures (500–800 °C) related to an extraordinary and not fully understood reduction of its surfaces. We have investigated pristine and ... -
In-Situ Monitoring of Interfacial Contact Resistance in PEM Fuel Cells
(Peer reviewed; Journal article, 2021)A new in situ method for measuring the interfacial contact resistance between the bipolar plate and gas diffusion layer of an operating PEM Fuel Cell has been developed. This method involves the insertion of probe wires, ... -
In-situ tensile and fatigue behavior of electrical grade Cu alloy for subsea cables
(Peer reviewed; Journal article, 2022)Distribution of electrical energy through subsea power cables has an increasingly important role in the renewable power generation. The majority of the subsea cables uses copper (Cu) as a conductor material. Cables suspended ... -
In-situ X-ray microtomography of interface between additively manufactured aluminium bronze and H13 tool steel
(Peer reviewed; Journal article, 2022)Directed energy deposition (DED) is an additive manufacturing process category where material is melted as it is deposited, often powder melted with a focused laser. In this work aluminium bronze was deposited onto H13 ... -
In-situ XRD studies of dolomite based CO2 sorbents
(Peer reviewed; Journal article, 2014)Calcined dolomite (a CaOMgO material derivative of the natural mineral dolomite) has the potential as a CO2 sorbent working at high temperatures (500-650 °C) in processes like post combustion carbonate-looping, or in sorbent ... -
Incorporation of an ionic liquid into a midblock-sulfonated multiblock polymer for CO2 capture
(Peer reviewed; Journal article, 2019)In the present work, hybrid block ionomer/ionic liquid (IL) membranes containing up to 40 wt% IL are prepared by incorporating 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF4]) into a midblock-sulfonated pentablock ...