• Ta-ITO Coated Titanium Bipolar Plates for Proton Exchange Membrane Water Electrolyzers 

      Lædre, Sigrid; Mendizabal, Lucia; Kongstein, Ole Edvard; Ødegård, Anders; Karoliussen, Håvard; Seland, Frode (Peer reviewed; Journal article, 2022)
      A novel bi-layer coating composed of a tantalum base layer with an Indium Tin Oxide (ITO) top layer was applied to titanium substrates. Samples were polarized ex situ in a parameter study, where the pH, potential and ...
    • Tailoring Upconversion and Morphology of Yb/Eu Doped Y2O3 Nanostructures by Acid Composition Mediation 

      Nunes, Daniela; Pimentel, Ana; Matias, Mariana; Freire, Tomas; Araujo, A; Silva, Filipe; Gaspar, Patricia; Garcia, Silvia; Almeida Carvalho, Patricia; Fortunato, Elvira; Martins, Rodrigo (Peer reviewed; Journal article, 2019)
      The present study reports the production of upconverter nanostructures composed by a yttrium oxide host matrix co-doped with ytterbium and europium, i.e., Y2O3:Yb3+/Eu3+. These nanostructures were formed through the ...
    • Tandem hydrodeoxygenation catalyst system for hydrocarbons production from simulated bio-oil: Effect of C-C coupling catalysts 

      Yeboah, Isaac; Li, Yahao; Rajendran, Kishore; Rout, Kumar Ranjan; Chen, De (Peer reviewed; Journal article, 2021)
      Research in the sustainable conversion of biomass to fuels and chemicals is a necessity for the reduction of the carbon footprint in transport energy. Herein, we demonstrate an efficient tandem catalyst to selectively ...
    • Tapping Gas from the Silicon Submerged Arc Furnace: An Industrial Measurement Campaign 

      Andersen, Vegar; Gaertner, Heiko; Grådahl, Svend; Ksiazek, Michal Tomasz; Einarsrud, Kristian Etienne; Tranell, Gabriella (Peer reviewed; Journal article, 2022)
      Producing high-silicon alloys in submerged arc furnaces (SAF) involves the generation of an intermediate process gas, consisting of silicon monoxide (SiO) and carbon monoxide (CO). Combustion of process gas from the taphole ...
    • Targeting OGG1 arrests cancer cell proliferation by inducing replication stress 

      Visnes, Torkild; Benitez-Buelga, Carlos; Cázares-Körner, Armando; Sanjiv, Kumar; Hanna, Bishoy M F; Mortusewicz, Oliver; Rajagopal, Varshni; Albers, Julian J.; Hagey, Daniel W.; Bekkhus, Tove; Eshtad, Saeed; Baquero, Juan Miguel; Masuyer, Geoffrey; Wallner, Olov; Müller, Sarah; Pham, Therese; Gokturk, Camilla; Rasti, Azita; Suman, Sharda; Torres-Ruiz, Raúl; Sarno, Antonio; Wiita, Elisée; Homan, Evert; Karsten, Stella; Marimuthu, Karthick; Michel, M; Koolmeister, Tobias; Scobie, Martin; Loseva, Olga; Almlöf, Ingrid; Unterlass, Judith Edda; Pettke, Aleksandra; Boström, Johan; Pandey, Monica; Gad, Helge; Herr, Patrick; Jemth, Ann-Sofie; El Andaloussi, Samir; Kalderén, Christina; Rodriguez-Perales, Sandra; Benítez, Javier; Krokan, Hans Einar; Altun, Mikael; Stenmark, Pål; Berglund, Ulrika Warpman; Helleday, Thomas (Peer reviewed; Journal article, 2020)
      Abstract Altered oncogene expression in cancer cells causes loss of redox homeostasis resulting in oxidative DNA damage, e.g. 8-oxoguanine (8-oxoG), repaired by base excision repair (BER). PARP1 coordinates BER and relies ...
    • Technical and environmental viability of a European CO2 EOR system 

      Thorne, Rebecca Jayne; Sundseth, Kyrre; Bouman, Evert; Czarnowska, Lucyna; Mathisen, Anette; Skagestad, Ragnhild; Stanek, Wojciech; Pacyna, Jozef M; Pacyna, Elisabeth G (Peer reviewed; Journal article, 2019)
      Captured CO2 from large industrial emitters may be used for enhanced oil recovery (EOR), but as of yet there are no European large-scale EOR systems. Recent implementation decisions for a Norwegian carbon capture and storage ...
    • Techno-economic assessment of blue and green ammonia as energy carriers in a low-carbon future 

      Arnaiz del Pozo, Carlos; Cloete, Schalk Willem Petrus (Peer reviewed; Journal article, 2022)
      Ammonia is an industrial chemical and the basic building block for the fertilizer industry. Lately, attention has shifted towards using ammonia as a carbon-free energy vector, due to the ease of transportation and storage ...
    • Techno-economic assessment of chemical looping reforming of natural gas for hydrogen production and power generation with integrated CO2 capture 

      Nazir, Shareq Mohd; Francisco Morgado, Joana; Bolland, Olav; Quinta-Ferreira, Rosa; Amini, Shahriar (Peer reviewed; Journal article, 2018)
      The current study presents the techno-economic analysis of the CLR-CC process. The CLR-CC process comprises of chemical looping reforming (CLR) of Natural Gas, water gas shift, CO2 capture and compression, and combined ...
    • Techno-economic assessment of long-term methanol production from natural gas and renewables 

      Arnaiz del Pozo, Carlos; Cloete, Schalk Willem Petrus; Jiménez Álvaro, Ángel (Peer reviewed; Journal article, 2022)
      Growing climate change concerns are driving interest in alternative energy carriers to fossil fuels. Methanol (MeOH) is a promising candidate to alleviate the challenges faced by hydrogen regarding transportation and ...
    • Techno-Economic assessment of natural gas pyrolysis in molten salts 

      Pruvost, Florian; Cloete, Schalk Willem Petrus; Cloete, Jan Hendrik; Zaabout, Abdelghafour (Peer reviewed; Journal article, 2022)
      Steam methane reforming with CO2 capture (blue hydrogen) and water electrolysis based on renewable electricity (green hydrogen) are commonly assumed to be the main supply options in a future hydrogen economy. However, ...
    • Temperature-Dependent Adhesion in van der Waals Heterostructures 

      Polfus, Jonathan M.; Benthem, Marta; Ali, Ayaz; Barragan-Yani, Daniel; Vullum, Per Erik; Sunding, Martin Fleissner; Taniguchi, Takashi; Watanabe, Kenji; Belle, Branson (Peer reviewed; Journal article, 2021)
      The interlayer coupling between 2D materials is immensely important for both the fundamental understanding of these systems, and for the development of transfer techniques for the fabrication of van der Waals (vdW) ...
    • Tensile and fatigue behavior of a Pb-Sn-Sb alloy investigated via small-scale in-situ mechanical testing in SEM 

      Wan, Di; Viespoli, Luigi Mario; Johanson, Audun; Hagen, Anette Brocks; Berto, Filippo; Alvaro, Antonio (Journal article; Peer reviewed, 2020)
      Pb-Sn-Sb alloys (E-alloy) are commonly used in subsea power cable sheathing. Due to the relatively low melting temperature, i.e. around 600 K, this type of alloy is prone to experience microstructural time-dependent evolution ...
    • Tensile characterization of a lead alloy: creep induced strain rate sensitivity 

      Viespoli, Luigi Mario; Johanson, Audun; Alvaro, Antonio; Nyhus, Bård; Sommacal, Alberto; Berto, Filippo (Journal article; Peer reviewed, 2018)
    • Tensile Strength of Nylon Netting Subjected to Various Concentrations of Disinfecting Chemicals 

      Føre, Heidi Moe; Dahle, Stine Veronica Wiborg; Gaarder, Rune Harald (ASME Proceedings | Ocean Space Utilization;OMAE2017-61519,, Chapter, 2017-06-25)
      This paper presents a study of traditional netting materials subjected to disinfecting chemicals during fish farming and treatment of net cages. A series of tests were performed in order to study the effect of various ...
    • Testing and modelling of butt-welded connections in thin-walled aluminium structures 

      Hoang, Nguyen-Hieu; Morin, David; Langseth, Magnus (Peer reviewed; Journal article, 2022)
      The present paper experimentally investigated the mechanical behaviour of butt-welded joints and evaluated suitable numerical approaches for modelling them in thin-walled structures with large shell-based models. Welded ...
    • Texture gradients and strain localisation in extruded aluminium profile 

      Khadyko, Mikhail; Dumoulin, Stephane; Hopperstad, Odd Sture (Peer reviewed; Journal article, 2016)
      Through-thickness crystallographic texture gradients may develop in extruded profiles and rolled sheets of aluminium alloys. These texture gradients are often modelled using the crystal plasticity theory in order to predict ...
    • The durability of the thermally decomposed IrO2-Ta2O5 coated titanium anode in a sulfate solution 

      Xu, Wenting; Haarberg, Geir Martin; Seland, Frode; Sunde, Svein; Ratvik, Arne Petter; Holmin, Susanne; Afvander, Åsa; Gustavsson, John; Zimmerman, Erik; Årke, Torjus (Journal article; Peer reviewed, 2019)
    • The effect of chordae tendineae on systolic flow 

      Morud, John; Skjetne, Paal; Urheim, Stig; Dahl, Sigrid Kaarstad (Journal article; Peer reviewed, 2019)
      When using Computational Fluid Dynamics to simulate ventricular blood flow in the heart, it has been common practice to neglect the effect of the sub-valvular apparatus and the trabeculae on the flow conditions. In this ...
    • The Effect of Copper Loading on Iron Carbide Formation and Surface Species in Iron‐Based Fischer–Tropsch Synthesis Catalysts 

      Pena, Diego; Jensen, Lise Saue; Cognigni, Andrea; Myrstad, Rune; Neumayer, Thomas; Van Beek, Wouter; Rønning, Magnus (Journal article; Peer reviewed, 2018)
      The effect of copper as promoter on iron carbide formation and the nature of surface species on iron‐based catalyst during Fischer–Tropsch synthesis (FTS) was investigated. Iron‐based catalysts (15 wt % of Fe) supported ...
    • The Effect of Elastic Strain and Small Plastic Deformation on Tensile Strength of a Lean Al–Mg–Si Alloy 

      Mørtsell, Eva Anne; Westermann, Ida; Marioara, Calin Daniel; Pedersen, Ketill Olav; Andersen, Sigmund Jarle; Røyset, Jostein; Holmedal, Bjørn; Holmestad, Randi (Journal article; Peer reviewed, 2019)
      Al–Mg–Si alloys are usually formed into their final shape by rolling or extrusion. After extrusion, the aluminium profiles are usually straightened, causing the material to be subjected to a small plastic deformation. This ...