• 18F-FACBC PET/MRI in diagnostic assessment and neurosurgery of gliomas 

      Karlberg, Anna Maria; Berntsen, Erik Magnus; Johansen, Håkon; Skjulsvik, Anne Jarstein; Reinertsen, Ingerid; Hong, Yan Dai; Xiao, Yiming; Rivaz, Hassan; Borghammer, Per; Solheim, Ole; Eikenes, Live (Peer reviewed; Journal article, 2019)
      Purpose: This pilot study aimed to evaluate the amino acid tracer 18F-FACBC with simultaneous PET/MRI in diagnostic assessment and neurosurgery of gliomas. Materials and Methods: Eleven patients with suspected primary ...
    • 1D modelling of membrane-assisted chemical looping reforming 

      Francisco Morgado, Joana; Cloete, Schalk Willem Petrus; Morud, John; Gurker, Thomas; Quinta-Ferreira, Rosa; Amini, Shahriar (Peer reviewed; Journal article, 2017)
      Membrane-assisted chemical looping reforming (MA-CLR) has been proposed as an alternative to the conventional CLR technology. In this work, a non-isothermal 1D model is used to simulate the MA-CLR fuel reactor. The effect ...
    • 1H NMR metabolic profiling of cod (Gadus morhua) larvae: potential effects of temperature and diet composition during early developmental stages 

      Chauton, Matilde Skogen; Galloway, Trine Falck; Kjørsvik, Elin; Størseth, Trond Røvik; Puvanendran, Velmurugu; van der Meeren, Terje; Karlsen, Ørjan; Rønnestad, Ivar; Hamre, Kristin (Journal article, 2015)
      Marine aquaculture offers a great source of protein for the increasing human population, and farming of, for example, Atlantic salmon is a global industry. Atlantic cod farming however, is an example of a promising industry ...
    • 1st DeepWind 5 MW Baseline design 

      Paulsen, Uwe S.; Vita, Luca; Madsen, Helge A.; Hattel, Jesper; Ritchie, Ewen; Leban, Krisztina; Berthelsen, Petter Andreas; Carstensen, Stefan (Journal article; Peer reviewed, 2012)
      The first 5MW baseline design of the DeepWind concept is presented for a Darrieus type floating wind turbine system for water depths of more than 150 m. This design will be used as design reference to test the next ...
    • 2-Naphthol Impregnation Prior to Steam Explosion Promotes LPMO-Assisted Enzymatic Saccharification of Spruce and Yields High-Purity Lignin 

      Hansen, Line Degn; Østensen, Martin; Arstad, Bjørnar; Tschentscher, Roman; Eijsink, Vincent; Horn, Svein Jarle; Varnai, Aniko (Peer reviewed; Journal article, 2022)
      The recent discovery that impregnation with a carbocation scavenger may improve the enzymatic saccharification of steam-exploded softwood has brought a softwood-based biorefinery closer to reality. However, the nature of ...
    • 25 years of field exposure of pre-cracked concrete beams; combined impact of spacers and cracks on reinforcement corrosion 

      Geiker, Mette Rica; Danner, Tobias; Michel, Alexander; Belda Revert, Andres; Linderoth, Oskar; Hornbostel, Karla (Peer reviewed; Journal article, 2021)
      The state of corrosion of three pre-cracked concrete beams was investigated after 25 years of marine exposure (atmospheric, tidal and submerged). The influence of inadequate plastic spacers was found to overrule the possible ...
    • A 2D FEM Model For Impedance and Loss Calculation of Armored Three-Core Cables With Inclusion of 3D Pitching Effects 

      Gustavsen, Bjørn Alfred (Peer reviewed; Journal article, 2023)
      A method is introduced for impedance and loss calculation of three-core power cables with steel armoring, based on 2D finite element method (FEM) computations. The pitching effect of the cores and armor wires is taken into ...
    • 2D-packing with an application to stowage in Roll-on Roll-off liner shipping 

      Hansen, Jone; Hukkelberg, Ivar; Fagerholt, Kjetil; Stålhane, Magnus; Rakke, Jørgen Glomvik (Journal article; Peer reviewed, 2016-08-14)
      Roll-on/Roll-off (RoRo) ships represent the primary source for transporting vehicles and other types of rolling material over long distances. In this paper we focus on operational decisions related to stowage of cargoes ...
    • 3-D Snake Robot Motion: Nonsmooth Modeling, Simulations, and Experiements 

      Transeth, Aksel Andreas (Journal article; Peer reviewed, 2008)
      A nonsmooth (hybrid) 3-D mathematical model of a snake robot (without wheels) is developed and experimentally validated in this paper. The model is based on the framework of nonsmooth dynamics and convex analysis that ...
    • 3D Basin-Scale Groundwater Flow Modeling as a Tool for Geothermal Exploration: Application to the Geneva Basin, Switzerland-France 

      Alcanié, Marion; Collignon, Marine; Møyner, Olav; Lupi, Matteo (Peer reviewed; Journal article, 2021)
      Switzerland promotes the energy transition by supporting the development of geothermal energy. We built a 3D basin-scale fluid flow model of the Geneva Basin, France-Switzerland, using the open-source Matlab Reservoir ...
    • 3D fluid modeling of positive streamer discharges in air with stochastic photoionization 

      Marskar, Robert (Peer reviewed; Journal article, 2020)
      Streamer discharges are thin plasma channels that precede lightning and sparks. They usually evolve in bundles as stochastic tree-like structures and are inherently difficult to model due to their multiscale nature. In ...
    • 3D graphene aerogel framework enwrapped LiFePO4 submicron-rods with improved lithium storage performance 

      Tian, Xiaohui; Chen, Zhonghua; Zhu, Yanbin; Huang, Xiao; Wu, Guan; Zhou, Yingke (Journal article; Peer reviewed, 2019)
      The three-dimensional (3D) graphene aerogel (GA)-wrapped LiFePO4 submicron-rod composite (LFP@GA) has been prepared successfully through a solvothermal method followed with rapid freezedrying. Monodispersed LiFePO4 ...
    • 3D Integration technology: Status and application development 

      Ramm, Peter; Klumpp, Armin; Weber, Josef; Lietaer, Nicolas; Taklo, Maaike M. Visser; de Raedt, W.; Fritzsch, Thomas; Couderc, Pascal (Journal article; Peer reviewed, 2010)
      As predicted by the ITRS roadmap, semiconductor industry development dominated by shrinking transistor gate dimensions alone will not be able to overcome the performance and cost problems of future IC fabrication. Today ...
    • A 3D kinetic Monte Carlo study of streamer discharges in CO2 

      Marskar, Robert (Peer reviewed; Journal article, 2024)
      We theoretically study the inception and propagation of positive and negative streamers in CO2. Our study is done in 3D, using a newly formulated kinetic Monte Carlo discharge model where the electrons are described as ...
    • 3D modelling of β'' in Al-Mg-Si: towards an atomistic level ab initio based examination of a full precipitate enclosed in a host lattice 

      Ehlers, Flemming J H; Dumoulin, Stephane; Holmestad, Randi (Peer reviewed; Journal article, 2014)
      We extend a first principles based hierarchical multi-scale model scheme for describing a fully coherent precipitate in a host lattice to 3D simulations. As our test system, the needle-shaped main hardening Al–Mg–Si alloy ...
    • 3D motion dynamics of axisymmetric bodies falling through water 

      Alsos, Hagbart Skage; Faltinsen, Odd Magnus (Journal article; Peer reviewed, 2018-12-01)
      A new simplified method for analysis of 3D motion dynamics of axisymmetric slender bodies falling from air through water is presented. Slender-body theory for potential flow of incompressible water is combined with 2D + t ...
    • 3D Printed PEI Containing Adsorbents Supported by Carbon Nanostructures for Post-combustion Carbon Capture From Biomass Fired Power Plants 

      Krishnamurthy, Shreenath; Blom, Richard; Andreassen, Kari Anne; Middelkoop, Vesna; Rombouts, Marleen; Borras, Adolfo Benedito (Peer reviewed; Journal article, 2021)
      Processes that utilize solid adsorbents to capture CO2 are promising alternatives to state-of-art Amine based technologies for capturing CO2 from large point sources. Although the energy needs of solid sorbent-based processes ...
    • 3D Radiation Detectors: Charge Collection Characterisation and Applicability of Technology for Microdosimetry 

      Tran, Linh T.; Prokopovich, Dale A.; Petasecca, Marco; Lerch, Michael L.F.; Kok, Angela; Summanwar, Anand; Hansen, Thor-Erik; Da Via, Cinzia; Reinhard, Mark I.; Rosenfeld, Anatoly B. (Journal article; Peer reviewed, 2014)
      A study of charge collection in SINTEF 3D active edge silicon detectors was carried out at ANSTO using Ion Beam InducedCharge (IBIC) technique.An IBIC study has shown that several different geometries of 3D detectors have ...
    • 3D reconstruction of existing concrete bridges using optical methods 

      Popescu, Cosmin; Täljsten, Björn; Blanksvärd, Thomas; Elfgren, Lennart (Peer reviewed; Journal article, 2019)
      Routine bridge inspections usually consist of visual observations. These inspections are time-consuming and subjective. There is a need to identify new inspection techniques for infrastructure that reduce traffic disturbance, ...
    • 3D silicon detectors for neutron imaging applications 

      Povoli, Marco; Kok, Angela Chun Ying; Koybasi, Ozhan; Getz, Michael Norderhaug; O'Neill, George; Roehrich, Dieter; Pedersen, Henrik; Monakhov, Eduard; Birch, Jens; Choolakkal, Arun Haridas; Kanaki, Kalliopi; Lai, Chung-Chuan; Hall-Wilton, Richard; Slavicek, Tomas; Llamas-Jansa, Isabel (Peer reviewed; Journal article, 2023)
      Neutron detection is of great importance in many fields spanning from scientific research, to nuclear science, and to medical application. The development of silicon-based neutron detectors with enhanced neutron detection ...