A distributed algorithm for controlling continuous and discrete variables in a radial distribution grid
Peer reviewed, Journal article
Published version
Permanent lenke
https://hdl.handle.net/11250/3103543Utgivelsesdato
2023Metadata
Vis full innførselSamlinger
- Publikasjoner fra CRIStin - SINTEF Energi [1670]
- SINTEF Energi [1799]
Sammendrag
The increased integration of distributed energy resources (DERs) in the distribution network with intermitent generation profiles will likely make voltage regulation a difficult task. However, DERs bring both challenges and opportunities, as they can provide renewable forms of local energy and act as voltage regulating components. The DERs are usually interfaced with power electronic devices, in which both their active and reactive power outputs can be regulated and treated as continuous control variables. In contrast, other voltage regulatory devices such as On-Load Tap-Changing (OLTC) transformers are often controlled by making discrete tap changes. Thus, appropriate control strategies are required to control and coordinate the DERs with other voltage regulatory devices. In this work, a distributed control strategy based on the Alternating Direction Method of Multipliers (ADMM) is developed, which controls both the continuous and the discrete variables in a distribution grid. The proposed control strategy is compared to a centralized and a local control architecture, where optimal parameters have been computed for the local controllers. Finally, a simulation study is made for the three different control architectures using a modified CIGRE medium voltage network. The results showed significant improvements in the daily voltage profiles while also reducing the power losses by over 30% when using an optimal control strategy. A distributed algorithm for controlling continuous and discrete variables in a radial distribution grid