Blar i SINTEF Open på forfatter "Marthinsen, Knut"
-
Ab-initio study of atomic structure and mechanical behaviour of Al / Fe intermetallic interfaces
Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Strandlie, Are (Peer reviewed; Journal article, 2020) -
Deformation Texture Evolution in Flat Profile AlMgSi Extrusions: Experiments, FEM, and Crystal Plasticity Modeling
Manik, Tomas; Marthinsen, Knut; Zhang, Kai; Imani Aria, Arash; Holmedal, Bjørn (Peer reviewed; Journal article, 2021)In the present work, the deformation textures during flat profile extrusion from round billets of an AA6063 and an AA6082 aluminium alloy have been numerically modeled by coupling FEM flow simulations and crystal plasticity ... -
The effect of heavy deformation on the precipitation in an Al-1.3Cu-1.0Mg-0.4Si wt.% alloy
Thronsen, Elisabeth; Marioara, Calin Daniel; Sunde, Jonas Kristoffer; Minakuchi, Kazuhiro; Katsumi, Tetsuya; Erga, Iven; Andersen, Sigmund Jarle; Friis, Jesper; Marthinsen, Knut; Matsuda, Kenji; Holmestad, Randi (Peer reviewed; Journal article, 2020)This work has investigated the effect of the combination of natural ageing and 80% pre-deformation after solution heat treatment on precipitation during subsequent artificial ageing in an Al-1.3Cu-1.0Mg-0.4Si wt.% alloy. ... -
The Effect of Small Additions of Fe and Heavy Deformation on the Precipitation in an Al–1.1Mg–0.5Cu–0.3Si At. Pct Alloy
Thronsen, Elisabeth; Mørkeseth, Hanne; Marioara, Calin Daniel; Minakuchi, Kazuhiro; Katsumi, Tetsuya; Marthinsen, Knut; Matsuda, Kenji; Holmestad, Randi (Peer reviewed; Journal article, 2022)The effect of 0.03 and 0.08 at. pct Fe additions on the formation of secondary phases in an Al–1.1Mg–0.5Cu–0.3Si at. pct alloy was investigated. Following solution heat treatment and natural aging, the alloys were analyzed ... -
The effects of quench rate and pre-deformation on precipitation hardening in Al–Mg–Si alloys with different Cu amounts
Saito, Takeshi; Marioara, Calin Daniel; Røyset, Jostein; Marthinsen, Knut; Holmestad, Randi (Peer reviewed; Journal article, 2014)The effects of quench rate after solution heat treatment in combination with 1% pre-deformation on precipitation hardening in three Al–Mg–Si alloys have been investigated by transmission electron microscopy and hardness ... -
EVOLUTION IN TEXTURE AND ITS THROUGH-THICKNESS VARIATIONS IN Al-Mg-Si-EXTRUSIONS: EXPERIMENTS AND MODELLING.
Zhang, Kai; Marthinsen, Knut; Holmedal, Bjørn; Aukrust, Trond; Segatori, Antonio (Chapter, 2018) -
First-principles study of tensile and shear strength of an Fe2Al5//Fe interface
Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Ringdalen, Inga Gudem; Strandlie, Are (Peer reviewed; Journal article, 2021)First-principles virtual tensile and shear strength calculations have been performed on the Fe2Al5// Fe4Al13 and -AlFeSi// Fe4Al13 interfaces. The Fast Inertial Relaxation Engine (FIRE) algorithm is used for optimizing ... -
Isothermal annealing of cold-rolled Al−Mn−Fe−Si alloy with different microchemistry states
Huang, Ke; Li, Yanjun; Marthinsen, Knut (Peer reviewed; Journal article, 2014)Microstructural evolution of a cold-rolled Al–Mn–Fe–Si alloy during annealing was studied. Except the as-cast variant, two other different homogenizations were considered, one gave a high density of fine dispersiods providing ... -
Lattice rotations in precipitate free zones in an Al-Mg-Si alloy
Christiansen, Emil; Marioara, Calin Daniel; Marthinsen, Knut; Hopperstad, Odd Sture; Holmestad, Randi (Peer reviewed; Journal article, 2018)Scanning precession electron diffraction and automated crystal orientation mapping in a transmission electron microscope (TEM) have been applied to quantitatively study the crystal orientation of precipitate free zones ... -
Modified embedded atom method potential for Fe-Al intermetallics mechanical strength: A comparative analysis of atomistic simulations
Khalid, Muhammad Zeeshan; Friis, Jesper; Ninive, Per Harald; Marthinsen, Knut; Ringdalen, Inga Gudem; Strandlie, Are (Peer reviewed; Journal article, 2021)The structural and mechanical properties of Fe-Al compounds (FeAl, Fe2Al, Fe3Al, FeAl2, FeAl3, Fe2Al5) have been studied using modified embedded atom method (MEAM) potentials. The equilibrium lattice constants, formation ... -
Quantifying the grain boundary segregation strengthening induced by post-ECAP aging in an Al-5Cu alloy
Jia, Hailong; Bjørge, Ruben; Cao, Lingfei; Hui, Song; Marthinsen, Knut; Li, Yanjun (Journal article; Peer reviewed, 2018)Hardening on annealing (HOA) has been frequently observed in nanostructured metals and alloys. For nanostructured materials obtained by severe plastic deformation (SPD), HOA has been attributed to the reduction of dislocation ... -
Soft particles assisted grain refinement and strengthening of an Al-Bi-Zn alloy subjected to ECAP
Jia, Hailong; Bjørge, Ruben; Marthinsen, Knut; Mathiesen, Ragnvald; Li, Yanjun (Journal article; Peer reviewed, 2017) -
Through thickness variations of deformation texture in round profile extrusions of 6063-type aluminium alloy: Experiments, FEM and crystal plasticity modelling
Zhang, Kai; Marthinsen, Knut; Holmedal, Bjørn; Aukrust, Trond; Segatori, Antonio (Journal article; Peer reviewed, 2018) -
Twinnability of Al–Mg alloys: A first-principles interpretation
Zhao, Dongdong; Løvvik, Ole Martin; Marthinsen, Knut; Li, Yanjun (Journal article; Peer reviewed, 2017)