Blar i SINTEF Open på forfatter "Gunnæs, Anette Eleonora"
-
Accelerated material development for laser powder-bed fusion using the arc melting process
Reiersen, Magnus; Gunnæs, Anette Eleonora; S. Azar, Amin; Diplas, Spyridon; Du, Qiang; M'Hamdi, Mohammed (Peer reviewed; Journal article, 2023)Metal additive manufacturing has in recent years gained an increasing amount of attention, especially the subgroup of laser powder-bed fusion and aluminium alloys. However, established alloys are designed for casting and ... -
Chemical stability of Ca3Co4−xO9+δ/CaMnO3−δ p–n junction for oxide-based thermoelectric generators
Gunnæs, Anette Eleonora; Tofan, Raluca; Berland, Kristian; Gorantla, Sandeep Madhukar; Storaas, Thomas Aarflot; Desissa, Temesgen Debelo; Schrade, Matthias; Persson, Clas; Einarsrud, Mari-Ann; Wiik, Kjell; Norby, Truls Eivind; Kanas, Nikola (Peer reviewed; Journal article, 2020)An all-oxide thermoelectric generator for high-temperature operation depends on a low electrical resistance of the direct p–n junction. Ca3Co4−xO9+δ and CaMnO3−δ exhibit p-type and n-type electronic conductivity, respectively, ... -
Correlation between surface chemistry and morphology of PtCu and Pt nanoparticles during oxidation-reduction cycle
Kalyva, Maria Evangelou; Sunding, Martin Fleissner; Gunnæs, Anette Eleonora; Diplas, Spyridon; Redekop, Evgeniy (Peer reviewed; Journal article, 2020)Process conditions during catalytic reactions induce significant changes in surface chemistry and structure of bi- (mono) metallic nanoparticles leading to their deactivation, and this can ultimately affect the reactions ... -
Heat source management in wire-arc additive manufacturing process for Al-Mg and Al-Si alloys
Oyama, Kohei; Diplas, Spyridon; M'hamdi, Mohammed; Gunnæs, Anette Eleonora; S. Azar, Amin (Journal article; Peer reviewed, 2019)Modelling of wire-arc additive manufacturing process is an effective way for adapting the optimum parameters as well as understanding and managing the sequences of layer-by-layer deposition. Some of these parameters such ... -
Interface phenomena in magnetron sputtered Cu2O/ZnO heterostructures
Jensen, Ingvild Julie Thue; Gorantla, Sandeep Madhukar; Løvvik, Ole Martin; Gan, Jiantuo; Nguyen, Phuong Dan; Monakhov, Edouard; Svensson, Bengt Gunnar; Gunnæs, Anette Eleonora; Diplas, Spyridon (Peer reviewed; Journal article, 2017)The interface between ZnO and Cu2O has been predicted to be a good candidate for use in thin film solar cells. However, the high predicted conversion efficiency has yet to be fully realized experimentally. To explore the ... -
Nanoscale Magnetic Properties of Additively Manufactured FeCoNiAlxMnx High-Entropy Alloys
Poulia, Anthoula; S. Azar, Amin; Svec, Peter; Bazioti, Kalliopi; Belle, Branson; Gunnæs, Anette Eleonora; Diplas, Spyros; Mikheenko, Pavlo (Chapter; Peer reviewed, 2020)Magnetic properties of High-Entropy Alloys based on the Fe-Co-Ni-Al-Mn system are reported. High-Entropy Alloys are cutting-edge technological materials containing five or more elements in relatively high concentrations ... -
New structure and insight on the phase transition within the Cu-Pd-Sn system with 25 at. % Sn
Amundsen, Monika; Pike, Nicholas; Løvvik, Ole Martin; Almeida Carvalho, Patricia; Gunnæs, Anette Eleonora (Peer reviewed; Journal article, 2022) -
Probing the structural evolution and its impact on magnetic properties of FeCoNi(AlMn)x high-entropy alloy at the nanoscale
Bazioti, Kalliopi; Løvvik, Ole Martin; Poulia, Anthoula; Almeida Carvalho, Patricia; S. Azar, Amin; Mikheenko, Pavlo; Diplas, Spyridon; Gunnæs, Anette Eleonora (Peer reviewed; Journal article, 2022)We report the first nanoscale investigation of FeCoNi(AlMn)x high-entropy alloys (HEAs) processed by laser metal deposition. The structural evolution of the alloy upon chemical composition variation (0.2 ≤ x ≤ 1.5) was ... -
Process–Structure–Property Relationship in FeCoNiAlxMnx Complex Concentrated Alloys Processed by Additive Manufacturing
Poulia, Anthoula; S. Azar, Amin; Schrade, M.; Graff, J.S.; Bazioti, Kalliopi; Gunnæs, Anette Eleonora; Carvalho, P.A.; Diplas, Spyridon (Peer reviewed; Journal article, 2021)Fourteen alloys of the FeCoNiAlxMnx system were processed by laser metal deposition (LMD). The feedstock was a weighted and proportional blend of the containing elemental powders, targeting the nominal alloy compositions. ... -
Structural properties of mixed conductor Ba1−xGd1−yLax+yCo2O6−δ
Strandbakke, Ragnar; Wragg, David Stephen; Sørby, Magnus Helgerud; Guzik, Matylda; Gunnæs, Anette Eleonora; Szpunar, Iga; Wachowski, Sebastian Lech; Balaguer, Maria; Carvalho, Patricia A.; Mielewczyk-Gryń, Aleksandra; Serra, Jose; Norby, Truls (Peer reviewed; Journal article, 2022)Ba1−xGd1−yLax+yCo2O6−δ (BGLC) compositions with large compositional ranges of Ba, Gd, and La have been characterised with respect to phase compositions, structure, and thermal and chemical expansion. The results show a ... -
Synthesis, microstructure, and thermoelectric properties of Sb-Based high entropy alloys
Rahman, Jamil Ur; Almeida Carvalho, Patricia; Soltani, Nayereh; Schrade, Matthias; Gunnæs, Anette Eleonora; Finstad, Terje Gunnar (Peer reviewed; Journal article, 2022)In this paper, we explore the synthesis of new antimonide compounds based upon concepts of high entropy alloys (HEA). HEAs are usually multi-element (⪆5) alloys with near the equiatomic composition. They have been given ...